RANathon Indoor O-RU

O-RAN 5G-NR, Sub 6 GHz Indoor RU Radio Unit (Indoor RU): 4T4R MIMO O-RAN split 7-2x RU

FEATURES:

  • High power output: 250mW x 4
  • Open architecture: supports O-RAN split 7-2x/ eCPRI interface
  • Massive MIMO antenna array of 4 x 4, built-in antenna
  • DPD, CFR, and AGC for better sensitivity and communication quality
  • Low modulation EVM, ALCR, and spurious emission
  • High upload sensitivity
  • Frequency band by SKU
  • Power consumption and high efficiency

STANDARDS CONFORMANCE verified by OTIC

  • O-RAN.WG8.IOT
  • O-RAN.WG4.IOT
  • O-RAN.WG4.CONF
  • End-to-end Performance and Stress Test
  • 3GPP 33.511 SCAS

Specifications


CategoryDescription
Power consumption60W maximum
Duplex modeTDD
Frequency bandby SKU:  n78 (3300MHz~3600MHz)/ n79 (4800MHz~4900MHz)
Channel raster30KHz
Bandwidth100MHz maximum
Network InterfaceSFP+ Connector*1/ eCPRI/ O-RAN Option 7-2x Category A
Management portRJ-45 connector/ 10/100/1000M adaptive
CapacityMIMO: 4T4R
Signal optimizationDPD, CFR
Max. transmit power240mW (25dBm) per channel
Modulation EVM (%)QPSK<17.5 %
16QAM<12.5 %
64QAM<8.0 %
256QAM<3.5%
ACLR<-45dBc @100MHz
<-55dBc @200MHz
spurious emissionsSpurious frequency range
9 kHz – 150 kHz<-36dBm@1KHz
150 kHz – 30 MHz<-36dBm@1KHz
30 MHz – 1 GHz<-36dBm@10KHz
1 GHz – 12.75 GHz<-30dBm@100KHz
12.75 GHz – 5th harmonic of the upper frequency edge of the DL operating band in GHz <-30dBm@1MHz
Frequency error<0.1ppm
UL sensitivity<-90dBm
Sync. mode1588 v2/ SyncE
Heat dissipationPassive
MTBF>100,000 Hours
Ingress protectionIP30
Mount KitWall and ceiling mounting
Operation temperature0℃ ~ +45℃
Operation humidity5% ~ 95%